WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

scooter bearings

scooter bearings
Author :Admin | Publish Date:2013-04-12 16:22:56
After a couple years of installing bearings, here are a few tips that I've learned to help reduce headaches related to this process. You're going to have to do this often for your kid and his friends, so you better learn how to do it sooner rather than later.


The series of numbers in front of the bearing name can provide much information about that specific type of bearing. Here is an example:6001ZZ
6 = Type Code
0 = Series
01 = Bore Size
ZZ = Suffix

Type Code Definitions:
1 - Self-aligning ball bearing
2 - Wide self-aligning ball bearing
3 - Double-row angular contact ball bearing
4 - Double-row ball bearing
5 - Thrust ball bearing
6 - Single-row deep groove ball bearing
7 - Single-row angular contact bearing
16 - Thin section single-row deep groove ball bearing
22 - Self-aligning roller bearing
23 - Wide self-aligning roller bearing

Series: (Identifies the lightness or heaviness of the skf bearing)
0 - Extra Light
1 - Extra Light Thrust
2 - Light
3 - Medium
4 - Heavy
7 - Not Sure
8 - Extra Thin Section
9 - Very Thin Section

Bore Sizes (in mm):
For most ntn bearings, the bore size can be calculated by adding the 3rd and 4th digits together and multiplying the result by 5. However, there are a few exceptions to this rule, as follows:
00 = 10 mm
01 = 12 mm
02 = 15 mm
03 = 17 mm

Suffix Meanings:
Z - Single Shielded
ZZ - Double Shielded
RS - Single Sealed
2RS - Double Sealed
V - Single Non-contact Seal
VV - Double Non-contact Seal
DDU - Double Contact Seals
NR - Snap Ring and Groove
M - Brass Cage
C3 - This marking indicates a radial internal clearance greater than the standard clearance. C3 bearings are usually fitted to equipment where there are large temperature differences between the inner and outer casings, therefore, sufficient clearance is needed to avoid early bearing failure.

In addition to using grease for packing headset bearings, I also like to use a little grease to help ease the friction between [scooter bearings] and metal core wheels during installation. Just dip your finger in the grease and put a light coating around the inside of the wheel's core where the outer ring of the bearing will make contact. It doesn't take much, so don't over-do it.

B20-141C3U1UR
B22-19 C3
B25-139C3

Contact Us

TEL:00852-54978621
FAX:00852-54979628
Email:sales@dbearings.com
Add:UNIT 04,7/F BRIGHT WAY TOWER,NO 33 MONG KOK ROAD,KL
WhatsApp:8618112377009

nsk information lists

Copyright © 2014 Hongkong NKF Machinery Co.,Limited. All rights reserved. TEL:00852-54978621 FAX:00852-54979628 Email:sales@dbearings.com